Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-29-2009, 07:14 PM   #1
Registered User
 
Join Date: Mar 2009
Location: Washington
Posts: 6
Question Dashboard gauges stop working

I was driving my Boxster for 30-40 minutes and stopped at the grocery for about 10 mintus. When I came back and restart the car, all the meter gauges was not working i.e. speed, RPM, temp, fuel. However, all the other light incidators are working e.g. seatbelt, speed limit, PSM, turn sigal. My car is starting and driving fine.

Would appreciate any help on what this problem would be.....

willos is offline   Reply With Quote
Old 03-29-2009, 07:34 PM   #2
Registered User
 
Join Date: Mar 2009
Location: DFW, TX
Posts: 206
Garage
check fuese / relays

Look in the fuse guide and see if the lights and guages are on different fuses / relays. Good place to start.
__________________
rob76turbo
Current Porsches: 2002 Boxster S (Speed yellow)
Past Porsches: 1972 914, 1987 944S, 1976 930, 1986 951, 1999 986, 1992 968, 2001 986 S, 2006 Cayman S, 1986 951 track car, 2001 986 S, 2005 Cayenne
rob76turbo is offline   Reply With Quote
Old 03-30-2009, 08:48 AM   #3
Registered User
 
Join Date: Aug 2005
Location: orange county, ca
Posts: 248
As mentioned previously double check the fuses, and relays..If not this could possibly be an internal speedometer problem, after you mentioned that all the needle markers (rpm, speed, temp, fuel) does not work, but all the other lights work..Also, id check the cluster connection- there are 2 main connectors for the cluster.
Goodluck.
spine911 is offline   Reply With Quote
Old 03-30-2009, 10:09 AM   #4
Registered User
 
Join Date: Mar 2009
Location: Washington
Posts: 6
No luck with fuse

Thanks for the advices.

Tried all the fuse associated with instrument cluster (B1, B10, E1) with no luck.
The fuse are all fine, I even tried the spare fuse on them to make sure.

Does anyone know where to find the 2003 relay chart? I found the 2000 chart but the relay names do not have too much direct relation with the instrument cluster:
http://theschillings.com/boxrelay.htm

I will try to disassemble the dash in the weekend to see whether it could be connection issues.
willos is offline   Reply With Quote
Old 03-30-2009, 08:26 PM   #5
Registered User
 
Join Date: Mar 2009
Location: Washington
Posts: 6
Mysteriously working again

Drove to work this morning and the gauges were not working. Same when I started the car after work, but during the way home, it all started working again.

This sounds pretty fragile...but I am happy that it is working again that's for sure.
willos is offline   Reply With Quote
Old 04-01-2009, 12:36 PM   #6
Registered User
 
Join Date: Aug 2005
Location: orange county, ca
Posts: 248
Looks like it's more of a connector issue(internal speedo, or external main connectors). I'd check the connectors to be sure, you don't want to be driving around without the temp gauge working all the sudden.
spine911 is offline   Reply With Quote
Old 04-01-2009, 03:02 PM   #7
Registered User
 
Lil bastard's Avatar
 
Join Date: Feb 2008
Location: Du Monde
Posts: 2,199
Starter (ignition) switch. Easy DIY.

__________________
1990 Porsche 964 Carrera 4 Cabriolet
1976 BMW 2002
1990 BMW 325is
1999 Porsche Boxster
(gone, but not forgotten)
http://i933.photobucket.com/albums/a...smiley-003.gif

Never drive faster than your Guardian Angel can fly!
Lil bastard is offline   Reply With Quote
Old 04-01-2009, 04:09 PM   #8
Registered User
 
Join Date: Aug 2005
Location: orange county, ca
Posts: 248
Quote:
Originally Posted by Lil bastard
Starter (ignition) switch. Easy DIY.


This could be it as well....The prelude to my 986 starter switch failure was the intermittent lighting of the Airbag light- all lights, gauges works.
spine911 is offline   Reply With Quote
Old 04-01-2009, 11:56 PM   #9
Registered User
 
Join Date: Mar 2009
Location: Washington
Posts: 6
Died once more

My gauges died again after working fine for the past day, doesn't move when I start up my car.

Ignition switch is a very good point, will try it out once I receive my order for the part.
Mean while I will check the panel connectors in the weekend.
willos is offline   Reply With Quote
Old 01-07-2010, 06:29 AM   #10
Registered User
 
Join Date: Jan 2010
Location: North Jersey
Posts: 7
Quote:
Originally Posted by willos
I was driving my Boxster for 30-40 minutes and stopped at the grocery for about 10 mintus. When I came back and restart the car, all the meter gauges was not working i.e. speed, RPM, temp, fuel. However, all the other light incidators are working e.g. seatbelt, speed limit, PSM, turn sigal. My car is starting and driving fine.

Would appreciate any help on what this problem would be.....
Hello, Did you ever figure the problem out? I am having the same problem and I would hate to buy an expensive new cluster to find out that wasnt the problem. You can contact me through the forum or email me at nacp1@myway.com. Thank you in advance for your help!

Last edited by nacp11; 01-07-2010 at 06:32 AM.
nacp11 is offline   Reply With Quote
Old 01-12-2010, 06:13 PM   #11
Registered User
 
Join Date: Mar 2009
Location: Washington
Posts: 6
Postponed....

Quote:
Originally Posted by nacp11
Hello, Did you ever figure the problem out? I am having the same problem and I would hate to buy an expensive new cluster to find out that wasnt the problem. You can contact me through the forum or email me at nacp1@myway.com. Thank you in advance for your help!
Sorry but I still haven't gotten around to install the ignition switch. The cluster has been working more reliably recently so I pushed it back.
willos is offline   Reply With Quote
Old 01-13-2010, 04:29 PM   #12
Registered User
 
Join Date: Feb 2009
Location: Ann Arbor, MI
Posts: 287
old school fix

yup mine would freeze as well - always seemed worse in the sunlight/heat.
quick fix is to give it a nice firm tap to the front of the cluster - or top of the dash.

Mine would also toggle b/w km and miles at random as well.
urban_legend is offline   Reply With Quote
Old 07-04-2010, 05:45 PM   #13
Registered User
 
Join Date: Mar 2009
Location: Washington
Posts: 6
Update

Just an update on this issue. I finally got around to installing a new ignition switch but it did not fix the problem. The instrument cluster is still having issues, in most cases it does work when starting up the car but eventually it comes back on.

willos is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page