SOoooo much better
When I bought my car, it had Kuhmo Ecsta Supras on it (18"). Driving it home, I thought it sounded like the rear brakes were sticking, worn out, and dragging the rivets on the rotors. Of course, the PPI told me that this was not the case. I also had a minor vibration at higher speeds. I suspected that either the tires were not balanced properly, or the tires had flat spots due to the cars relatively low mileage.
Today I got Goodyear Eagle F1 Asymmetrics put on. The noise is gone. These tires are very quiet. The ride is a bit more harsh, but I'm fine with that. The vibration is gone too. In order to check if the vibration was gone or not, I jumped on the highway real quick - for about 2 miles. I was following a truck on the on ramp, so my speed was limited. When I was able to get past him, I accelerated slightly and thought I was doing around 50mph at that point. I looked at the speedo and it said I was doing 70! Damn. It's gonna be hard not to speed now. Needless to say, I'm happy. Hopefully, they'll be good on the track next week. |
Be careful until the new tires are thoroughly scrubbed-in. Anti-mold/fungal chemicals and such can make the tire slick for the 1st 100 mi. or so. Best not to get on it until this is scrubbed off and the grip improves. Glad you like your new shoes!
|
congrats on the new tires!
I will tell you a story: When I first got my car I didn't realize the rear tires were worn. Once I did, I started investigating what to get. I had PZeros. I thought, "I am not getting these again. They s^ck. I put Michelins on all the way around. What a difference! My conclusion: the PZeros themselves may not have been relevant. The extreme wear and probably square nature was the problem! Ha ha. I can be pretty ignant sometimes. :) |
Quote:
|
Quote:
|
The one thing that drives me nuts on my Box is how loud the stock Michelin tires are. This is encouraging when it comes time for me to replace them - I'll look at the Good year tires.
-Steve |
just so we are so are not providing any mis-information, new tires need to be scrubbed in a bit to wear off the mold release agent, the stuff that makes it so the rubber releases from the tire mold when made at the factory and not an "Anti-mold/fungal chemical" ;)
|
Quote:
I think what you are talking about is "mold release" compound. This has nothing to do with fungi or biological molds but instead allows the tire to more easily "release" from the "mold" in which it was made. Mold release is a kind of greasy, powdery substance on the tire that is indeed slippery and does need to be worn off through driving. Regards, Alan |
Quote:
|
That's neat looking. Makes sense to have a tread mold; I just never thought about it before.
http://www.pushcorp.com/Success%20St...Drilling-2.jpg |
We're getting hammered by rain here today. These tires have far better wet grip than those old Kuhmos did. On corners where the back end would break loose accidentally <wink, wink>, these new tires are sticking like glue.
BTW, when I removed the Kuhmos, they still had quite a bit of tread on them before they got to the wear indicators. I had a bubble in the sidewall of one of the fronts, so I had to replace those. I wanted to keep the grip levels constant front to rear, so I replace all 4. |
Quote:
|
There's nothing like the good feeling you get when mounting up new shoes on the little lady....
BTW, I went with Pirelli P Zero Neros and the ride is smooth as silk. |
Quote:
|
All times are GMT -8. The time now is 01:15 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website