New Style MAF??

[CJ_Boxster]

I read on a thread on renntech that the topic starter bought one and didnt notice any difference but then had his DME reprogrammed by the dealer to work with that new MAF and it ran a hell of a lot better.

[geoff]

Take a look at http://mike.focke.googlepages.com/checkenginelightcausedbymassairflowsensor and Boxster TSB 2445 (Air Flow Sensor) dated Apr 6, 2001 (if you can get access to it). The TSB specifically says the earlier E-gas MAF (996 606 124 00) needs to have the DME reprogrammed when replacing the 996 606 124 00 MAF with the newer 986 606 125 00 one. I also found out yesterday it is recommended you disconnect your battery for 5+ minutes to clear out all stored values so your DME can relearn the MAF programming

Supposedly DME programming at a dealer with a PST2 or PIWIS is about 1/2 hour labor charge

[superglide]

Originally Posted by CJ_Boxster

I read on a thread on renntech that the topic starter bought one and didnt notice any difference but then had his DME reprogrammed by the dealer to work with that new MAF and it ran a hell of a lot better.

Thanks Carlos, and I'll do some asking around. I just HATE to go to the Dealer for anything else other that test hops in new cars... BTW; your location sounds like where I used to surf in Santa Cruz; the infamous "Sewer Peak"....
Best,
Andy