Pagid E1 blacks

[dcporsche99]

Well, nice job on taking care of that issue. Sounds like good 'ol customer service! What shop is that?

Originally Posted by dcporsche99

Well, nice job on taking care of that issue. Sounds like good 'ol customer service! What shop is that?

I't's an ebay seller out of Toronto, they sell Zimmermans too. Tonight the motive arrived and I'm a bit confused by one of the instructions. It says if the Motive still has fluid in it when you are done bleeding you tip it away from the supply tube, open the bleeder nearest the master and let air flow back into the fluid reservoir...What? Wouldn't that require re bleeding of that caliper? It's also comical that the directions are on the unit only and not in print, gee felllas you think the bottle will remain scrape & grease free it's whole life? I guess by then you either know how it works or have thrown it out anyhow. I'm starting to think I'm biting off a big chunk of headache, especially since I've yet to locate the clutch bleed from the posted pic. The pan splits underneath the car, I'm thinking it's under the front piece.

They left me a message tonight, the pagids are 421 blacks, the reviews are good, if anyone is running these please jump in.

[Pat]

A couple of you are confusing the two different compounds of Pagid Blacks. There is a street compound and a race compound. If you use the wrong one for the wrong application, you'd know right away.
The Blacks the shop recommended are great street pads. They are similar to OEM. The best high-performance street pad I've used are the Pagid Blues, which are just a step more aggressive than the street-oriented Blacks.

[CJ_Boxster]

I replaced my front pads yesterday when i finished up my eibach and new strut install and i wasnt sure weather they are good or not because of the price....

When the shop i was at called there supplier, we were quoted $60 and some change for Pagid blacks and $90 and some change for OE front pads. I dont know what front pads i had just before replacing them but they sure did make alot of dust and didnt stop very well... The pagid black seems to grip better than the pads i had prior... Ill have to see if they make more dust that my previous dust makers.

EDIT: turns out i heard wrong, th pads i got for the front are not Pagid... they are Bendix... i think pagid is probably a higher quality and/or price than what i've gotten but they sure are better than whatever the heck else was on my car prior to changing them.

[RandallNeighbour]

Originally Posted by xusmnimij

I't's an ebay seller out of Toronto, they sell Zimmermans too.

gforcebrakes.com?

If so, that's who I just bought my Pagid blacks pads and zimmerman cross-drilled cadmium plated rotors from a couple of weeks ago.

[jderiansf]

Originally Posted by xusmnimij

I't's an ebay seller out of Toronto, they sell Zimmermans too. Tonight the motive arrived and I'm a bit confused by one of the instructions. It says if the Motive still has fluid in it when you are done bleeding you tip it away from the supply tube, open the bleeder nearest the master and let air flow back into the fluid reservoir...What? Wouldn't that require re bleeding of that caliper? It's also comical that the directions are on the unit only and not in print, gee felllas you think the bottle will remain scrape & grease free it's whole life? I guess by then you either know how it works or have thrown it out anyhow. I'm starting to think I'm biting off a big chunk of headache, especially since I've yet to locate the clutch bleed from the posted pic. The pan splits underneath the car, I'm thinking it's under the front piece.

They left me a message tonight, the pagids are 421 blacks, the reviews are good, if anyone is running these please jump in.

As for the Motive: you tilt and allow air into the supply tube only until the air reaches the reservoir. This way, when you dis-assemble it you don't have a reservoir filled over the brim.

Make sense?

Jason

Here's a pic of the finished work. Regarding the Motive, it works better then I ever imagined it would. In the instructions they say to tip the unit and bleed the closest caliper for removal of residual fluid in the Motive. I just tipped it and very carefully and slowly released the air by opening the motive top surrounded by rags just in case, it worked fine.

[dcporsche99]

Looks nice!

BTW, what's with the screen name change? Wasn't sure who you were for a second there!

Originally Posted by dcporsche99

Looks nice!

BTW, what's with the screen name change? Wasn't sure who you were for a second there!

It was a request, one I was fine with, the joke was old a while ago anyhow..If you think they look cool you should see the black chromed intake vents I just got back from Cali, they look awesome.

[dcporsche99]

Ok, I guess it's better not to ask why.....

Cool new screen name anyway!