wtf!!!!!!!!!! - 986 Forum - The Community for Porsche Boxster & Cayman Owners

11-26-2007, 08:29 AM

CAN THIS BE REAL

http://cgi.ebay.com/ebaymotors/Porsche-Boxster-986-2-5L-2-7L-97-98-99-Exhaust-Header_W0QQcmdZViewItemQQcategoryZ133195QQihZ017QQ itemZ270189928859QQrdZ1QQsspagenameZWDVW

blinkwatt · 11-26-2007, 08:46 AM

huh, looks like they are selling the Top Speed headers like every other eBay seller. If so those are the same headers that Che(Delubozparts) sells.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270185661112

From what I've heard all the headers available for the non e-gas are pretty much the same.

JAAY · 11-26-2007, 08:49 AM

You get what you pay for.

Kirk · 11-26-2007, 08:48 AM

Um, yeah it's for real. Take a look at the completed auctions for this exact heading. Several of these headers have sold over the last couple of weeks for as low as $77!!! But you get what you pay for. Don't expect to receive anything better than really cheap headers. Still at that price you could almost just throw them away if you didn't like them!

SRQ Boxster · 11-26-2007, 08:54 AM

I hope so. I won one of these auctions last week. I have not received it yet but it should be this week. I'm scheduled for some Dyno time this Saturday. If all goes well I may be able to post some results for these headers. :dance:

jmatta · 11-26-2007, 10:50 AM

I see lots of CEL problems with something like these.

meerzee · 11-26-2007, 10:54 AM

Do they make these for the Dodge Charger too?

porsche986spyder · 11-26-2007, 11:38 AM

Quote:

Originally Posted by jmatta

I see lots of CEL problems with something like these.

You should be fine as long as you keep the 2nd set of cats towards the rear muffler. I've only hear people having problems when deleting both sets.

eslai · 11-26-2007, 03:07 PM

There's a reasonable price for everything. "You get what you pay for" is true, up to a point--beyond that you're just paying an artificial premium.

I don't believe that most of the porsche parts out there in the aftermarket are worth as much as they're selling for, but this one is definitely on the cheap side of things.

You're almost guaranteed some combination of the following:

1. Made in China, copied from some westerner's design.
2. Poor fitment (warped flanges, poor quality control, cold welds, etc.)
3. Poor long-term durability.
4. Minimal engineering work done to ensure a benefit.
5. No product support.

blinkwatt · 11-26-2007, 04:13 PM

Quote:

Originally Posted by jmatta

I see lots of CEL problems with something like these.

Most of the problems with CELs are related to the o2 sensor location. Most people put the none e-gas headers on e-gas cars....that's a no-no.

SRQ Boxster · 11-27-2007, 04:17 PM

Okay, I was skeptical when I ordered these but was willing to take a $100.00 risk. I received the headers today and I have to say so far I am quite pleasantly surprised with them. I have seen several other headers that are available for the Boxster and these look equally well constructed as any of them. They are stainless, Tig welded and have a mirror-like finish. The flanges are 10mm thick with 1 5/8" tubes and a 2" collector. The inside tubes are also ported at the flange for smoother exhaust flow. I hope to have these installed and on the Dyno by the end of the week. I'll post any fitment issues and results when available.

11-27-2007, 04:26 PM

Quote:

Originally Posted by SRQ Boxster

Okay, I was skeptical when I ordered these but was willing to take a $100.00 risk. I received the headers today and I have to say so far I am quite pleasantly surprised with them. I have seen several other headers that are available for the Boxster and these look equally well constructed as any of them. They are stainless, Tig welded and have a mirror-like finish. The flanges are 10mm thick with 1 5/8" tubes and a 2" collector. The inside tubes are also ported at the flange for smoother exhaust flow. I hope to have these installed and on the Dyno by the end of the week. I'll post any fitment issues and results when available.

awesome cant wait

11-27-2007, 04:28 PM

Quote:

Originally Posted by SRQ Boxster

Okay, I was skeptical when I ordered these but was willing to take a $100.00 risk. I received the headers today and I have to say so far I am quite pleasantly surprised with them. I have seen several other headers that are available for the Boxster and these look equally well constructed as any of them. They are stainless, Tig welded and have a mirror-like finish. The flanges are 10mm thick with 1 5/8" tubes and a 2" collector. The inside tubes are also ported at the flange for smoother exhaust flow. I hope to have these installed and on the Dyno by the end of the week. I'll post any fitment issues and results when available.

I am genuinely interested in how loud they are with the top up, just the SS Dansk unit raises the interior noise a lot. I'd love the gutteral sound of headers and extra horses sometimes, however, calling attention to your car being exceptionally noisy can't be a good thing as far as avioding the pullover.

Flat Spin · 11-27-2007, 05:00 PM

I purchased a similar "Chi-com" header for my Jeep Wrangler about 6 months ago for about $50. I haven't had any problems with it even after some off-road wheeling and could of runs on the beach. I suspect that many aftermarket products like this are made behind the "Yellow Curtan" anyway. I do have concerns about quality control. It is easy to make a weld look good even when it isn't. I'm not sure that I would do the same for a Porsche though. Just my opinion.