Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 08-24-2007, 10:27 AM   #1
Registered User
 
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
Send a message via AIM to blinkwatt
Corbeau Seats?

What's the catch to Corbeau's seats? They are nice and on par quality wise with entry level Sparco & Recaro seats I've sat in. Why are they 1/2 the $$$ of Sparco,Recaro and Momo seats? Does anyone here have any experience with Corbeau seats?

__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house

Last edited by blinkwatt; 08-24-2007 at 10:30 AM.
blinkwatt is offline   Reply With Quote
Old 08-24-2007, 10:58 AM   #2
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
ok it depends if you're talking for track/autox use or for use in a road car.

for track/autox the cheap racing seats like Corbeua are adequate. Not much more than that. Those seats meet only the lowest standards. A real racing seat is ultra expensive because it meets much higher saftety standards. I think Cobra make some very good Kevlar seats for the money.

For road use I would never use a budget Momo, Sparco or Corbeau seat. You are way safer in your Porsche OEM seat which has at least gone through extensive crash testing both here and in Germany.

A while back I ordered the Corbeau A4? My first mistake was buying a racing seat that reclines. That's your first red flag (fake). When the seats arrived the materials where crap. Thin fabric, low quality all around. Then I was hit with a $100 restocking fee. The GT3 seats may be expensive but they are legit.
I'm not sure I would trust any seat that cost less than $800-$1000. I just don't think its feasible to make a safe seat on a budget.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW
Perfectlap is offline   Reply With Quote
Old 08-24-2007, 11:22 AM   #3
Registered User
 
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
Send a message via AIM to blinkwatt
Thanks for the input! Those Cobra seats actually look comfortable,I'l try to find a shop in town that carries them to check them out.
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house
blinkwatt is offline   Reply With Quote
Old 08-24-2007, 01:28 PM   #4
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
you might check out the Recaro's too. The Pole Position is essentially the GT3 seat so maybe you can install their seats without having to order seperate floor mounting rails and save allot of dough.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW
Perfectlap is offline   Reply With Quote
Old 08-24-2007, 02:31 PM   #5
Registered User
 
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
Send a message via AIM to blinkwatt
Quote:
Originally Posted by Perfectlap
you might check out the Recaro's too. The Pole Position is essentially the GT3 seat so maybe you can install their seats without having to order seperate floor mounting rails and save allot of dough.
Do you happen to know how much the seats weight?
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house
blinkwatt is offline   Reply With Quote
Old 08-24-2007, 04:32 PM   #6
boggtown
Guest
 
Posts: n/a
Ha, I just ordered my GT3 seats today! They will be here in like 3 days! My advice, and ive done lots and lots and lots of searching over the past year... save up your money. I talked to todd a whole lot about the corbeaus. While price is right(ish), you still have corbeau stitched into the headrest, and i see these seats is old beater mustangs, to honda civics, ect.... that was the hugest turn off ever. But its up to you if you want to downgrade to fabric seats that are fiberglass. I upgraded to black alcantera carbon fiber seats from imagine auto. While they are replicas, i saw them in every 911 there, and they know their stuff, so I trust them.
  Reply With Quote
Old 08-24-2007, 04:57 PM   #7
Registered User
 
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
Send a message via AIM to blinkwatt
Quote:
Originally Posted by boggtown
Ha, I just ordered my GT3 seats today!.
Dude please tell me you didn't pay the $2k that they are asking?!

http://cgi.ebay.com/ebaymotors/Porsche-GT3-replica-Track-Seats-986-996-GT2-Alcantara_W0QQcmdZViewItemQQcategoryZ33701QQihZ011 QQitemZ320151180635QQrdZ1QQsspagenameZWDVW
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house
blinkwatt is offline   Reply With Quote
Old 08-24-2007, 05:46 PM   #8
boggtown
Guest
 
Posts: n/a
It says like 1500 after shipping. And no. Ive looked everywhere, and asked everyone, you cannot get them for under 1200, me and todd were gonna buy multiple orders and they were gonna give them to us for 1200 plus shipping or something ridiculous. So I paid 1250 with a 10% discount, so I am pleased. They are probably those same seats for all I know, but it could be night and day depending on imagines supplier or carbon fiber maker.
  Reply With Quote
Old 08-24-2007, 07:11 PM   #9
Registered User
 
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
Send a message via AIM to blinkwatt
Quote:
Originally Posted by boggtown
It says like 1500 after shipping. And no. Ive looked everywhere, and asked everyone, you cannot get them for under 1200, me and todd were gonna buy multiple orders and they were gonna give them to us for 1200 plus shipping or something ridiculous. So I paid 1250 with a 10% discount, so I am pleased. They are probably those same seats for all I know, but it could be night and day depending on imagines supplier or carbon fiber maker.
Are they identical to the GT3 seats? Say if I didn't know they are replicas would I be able to tell?

Does the price you pay include the mounting brackets and such?
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house
blinkwatt is offline   Reply With Quote
Old 08-24-2007, 08:04 PM   #10
Registered User
 
Join Date: Aug 2006
Location: San Francisco
Posts: 156
I had the replicas.. Sitting in my house for 4 months and I couldn't put them in my car. The feel so unsafe its not even funny. Its your life so I am not saying do not buy them, but I sold mine and just got the factory seats. Double the price, double the quality and safer.. Just my .02
__________________
cristopher

*youth is wasted on the young*


Photos of my Boxster S

Painted center console, artic silver
, De Snorkle, 18" Carrera lightweight - 285-30-18 - Fabspeed Exhaust

http://www.cristopherbenitah.com/boxster.jpg
cbenitah is offline   Reply With Quote
Old 08-24-2007, 08:35 PM   #11
Registered User
 
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
Send a message via AIM to blinkwatt
Quote:
Originally Posted by cbenitah
I had the replicas
Where did you get your replicas from?
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house
blinkwatt is offline   Reply With Quote
Old 08-24-2007, 08:42 PM   #12
Registered User
 
Join Date: Aug 2006
Location: San Francisco
Posts: 156
ebay... I paid 3k for the factory seats and 1700 for the replicas.. its not THAT much difference IMHO
__________________
cristopher

*youth is wasted on the young*


Photos of my Boxster S

Painted center console, artic silver
, De Snorkle, 18" Carrera lightweight - 285-30-18 - Fabspeed Exhaust

http://www.cristopherbenitah.com/boxster.jpg
cbenitah is offline   Reply With Quote
Old 08-24-2007, 08:51 PM   #13
boggtown
Guest
 
Posts: n/a
They come with car specific brackets too. They are completely identical except for the recaro logo on the back and the porsche crest on the front, lol. I for one went to imagine since i live in town and asked to sit in them, sit in other seats, play with harnesses, etc... and they felt like high strength racing seats. They had them in their own race cars including a turbo 993 with full roll cage. And I know they have been fully tested or they wouldnt use them.
  Reply With Quote
Old 08-24-2007, 08:55 PM   #14
boggtown
Guest
 
Posts: n/a
Did you have the fiberglass replicas or the carbon fiber? Cause I hear some thinner glass seats flex making them feel unsafe. Is that what made you sell them?
  Reply With Quote
Old 08-24-2007, 10:20 PM   #15
Registered User
 
Join Date: Aug 2006
Location: San Francisco
Posts: 156
They were fiberglass.. I could flex them like a thin wooden stick...
__________________
cristopher

*youth is wasted on the young*


Photos of my Boxster S

Painted center console, artic silver
, De Snorkle, 18" Carrera lightweight - 285-30-18 - Fabspeed Exhaust

http://www.cristopherbenitah.com/boxster.jpg
cbenitah is offline   Reply With Quote
Old 08-24-2007, 11:07 PM   #16
Registered User
 
Join Date: Sep 2006
Location: chicago
Posts: 3,510
Send a message via AIM to djomlas
i think 3K for seats is a lot. if you use the car on the track every weekend, then i can see the use, but just for looks and around the town...i dunno.
not that i wouldn't like them in my car, but the price is just a little too steep for something like seats...and i do understand quality and safety do matter.
__________________
http://i34.tinypic.com/157yslk.jpg
"I couldn't find the sports car of my dreams, so I built it myself." ~F. Porsche
Gemballa springs::litronics::Eurotech 18s(275/225)::B&M::MOMO wheel::
exhaust cutouts::EVOcoldair intake::OEM smoked tails & sidemarkers::

colormatched bumperettes::Top Speed Pro-1 exhaust::
my cardomain/pictures page
djomlas is offline   Reply With Quote
Old 08-24-2007, 11:32 PM   #17
Registered User
 
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
Send a message via AIM to blinkwatt
Quote:
Originally Posted by cbenitah
They were fiberglass.. I could flex them like a thin wooden stick...
Do you mind linking which ebay seller you bought them,or better yet the auction itself?
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house
blinkwatt is offline   Reply With Quote
Old 08-24-2007, 11:32 PM   #18
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
If you are willing to spend $3K on wheels, skirting, spoilers, shift knobs, lowering springs etc...but then want to go cheap on the very thing keeping you from getting ejected from the car? The seats are NOT cosmetic... they really are safety equipment, like your brakes.
I think people forget that the seats are not just things to plant your butt in.
Most low end seats are made of pepsi can grade metals. Who knows where the replicas are made or how they are made. Those seats have to be able to withstand a side impact with a Lincoln Navigator and not crush into your kidneys.
Not to mention the expensive seats always sell quickly if you do decide to sell them seperately from your car.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW

Last edited by Perfectlap; 08-24-2007 at 11:36 PM.
Perfectlap is offline   Reply With Quote
Old 08-25-2007, 08:31 AM   #19
Registered User
 
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
Send a message via AIM to blinkwatt
Quote:
Originally Posted by Perfectlap
Who knows where the replicas are made or how they are made.
These are the three I've seen on eBay;

http://cgi.ebay.com/ebaymotors/Porsche-GT3-Replica-Seats-CARRERA-C2-C4-C4S-GT2-TURBO_W0QQcmdZViewItemQQcategoryZ33701QQihZ011QQit emZ320149360006QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/Porsche-GT3-replica-Track-Seats-986-996-GT2-Alcantara_W0QQcmdZViewItemQQcategoryZ33701QQihZ011 QQitemZ320150326978QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/Porsche-GT3-Style-seats-GT2-carrera-boxter-986-996-911_W0QQcmdZViewItemQQcategoryZ33701QQihZ012QQitem Z220141787498QQrdZ1QQsspagenameZWDVW

I'm not sure if IA is selling the same as Maxspeed or not,but I bet they are.
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house
blinkwatt is offline   Reply With Quote
Old 08-25-2007, 08:50 AM   #20
boggtown
Guest
 
Posts: n/a
To be honest, I dont really care where they got them, Ive sat in them so I know they are sturdy. I will take pictures when I get them. My inbox is always full form people wanting to know about my exhaust, or my grills, or blah and blah, lol, so I didnt get your last message blink.

I also used to see other GT3 seats; ones with the crest in the headrest, on ebay. Wonder where they went...

  Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page