986 Forum - The Community for Porsche Boxster & Cayman Owners
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Boxster General Discussions (http://986forum.com/forums/boxster-general-discussions/)
-   -   Help! Clutch Bleeder Nipple Valve Size! (http://986forum.com/forums/boxster-general-discussions/11021-help-clutch-bleeder-nipple-valve-size.html)

Franco 05-23-2007 01:38 PM
Thanks Blinkwatt, My car has 64000 KM, what made you change those parts out :)

blinkwatt 05-23-2007 01:40 PM
Quote:
Originally Posted by Franco
Thanks Blinkwatt, My car has 64000 KM, what made you change those parts out :)
Well I went to bleed the slave cylinder and I found out that someone had stripped the bleeder valve,not allowing me to bleed it. It didn't effect anything,car drove fine,it's just one of those things I knew wasn't 100% so I made it 100% again.

insite 05-23-2007 02:37 PM
FYI if you have a power bleeder there's no need to bench bleed the master or slave.

timothy 09-15-2007 11:56 AM
Quote:
Originally Posted by blinkwatt
I took this pic just in case anyone is going to bleed their own clutch in the future, all other pics or drawing I've seen are craptastic. This is what the bleeder nipple and valve looks like,enjoy.
Thank you!!! Found the photo half way through flushing the brakes and it saved me a ton of time trying to decipher a cryptic schematic.


All times are GMT -8. The time now is 05:36 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website