Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster and Cayman Classified Ads > Boxster and Cayman Parts for Sale or Wanted

Post Reply
 
LinkBack Thread Tools Display Modes
Old 10-15-2019, 09:44 AM   #1
Registered User
 
Join Date: Aug 2017
Location: Texas
Posts: 35
Parting out ‘01 Boxster S

Parting out a crashed 01 S. Large parts, to include the engine, transmission, top, bumpers are destroyed or are already gone. I am working on boxing the remaining parts and listing on eBay. Purchasing there may be faster and easier with shipping and payment, but here will work as well. All items are Buy It Now with Offers enabled. This should not violate forum auction rules). All prices are below what I found for similar items and I’m willing to make deals. Here is the link to my eBay listings https://www.ebay.com/sch/i.html?sid=laxphatty&isRefine=true&_pgn=1

Below is what is currently listed and listing prices:
-ECU, immobilizer, key chip. $700
-Ignition, door lock, key blade. $200
-Heater Core. $40
-Console carpet trim. $20
-Fender Vent trim LEFT. $40
-Fender Vent trim RIGHT. $40
-Expansion tank with caps, hoses, bleeder valve and hoses. $65
-Shifter. $150
-Throttle body. $90
-Equalizer. $20
-Batwing trim with “Boxster S” logo. $25 (sold)
-Stereo bracket. $20
-Cd storage. $20
-Ac control support brackets. $5
-Bumper pads. $60
-Crank pulley. $20
-Serpentine belt. $40
-trunk actuator. $30
-dash vent trim. $50

Below are some parts I haven’t packaged/priced/listed yet. Let me know if something catches your eye:
-Steering wheel
-Top latch sensor
-Airbag control module
-ABS sensor
-Cluster pod
-Door speaker pods
-Door cards
-Console trim
-Engine Fan and shroud
-Cup holder
-Stereo amp (has dent from crash, may not work)
-CD changer
-Door latches
-Spoiler lift arms
-Spoiler lift motor
-Brake booster
-Brake calipers
-Left splash guard
-Intake
-Headlights (LED kind from eBay. Need good cleaning and polishing)
-Wiper arms
-Seats with power controls (passenger side is intact, driver side has tears in bottom)
-Dashboard
-Climate control motor
-Fuel tank
-Trunk (silver)
-Spoiler from ‘03 986.2
-Rear bumper (silver) from ‘03 986.2. Not perfect shape, but looks decent installed
-Factory muffler
-Brake master cylinder


Last edited by CBRNWO; 10-16-2019 at 07:55 AM.
CBRNWO is offline   Reply With Quote
Old 10-23-2019, 05:07 PM   #2
Registered User
 
redciv1's Avatar
 
Join Date: Jun 2014
Location: Dacula, Georgia
Posts: 264
How much for the headlights.
redciv1 is offline   Reply With Quote
Old 10-24-2019, 03:01 AM   #3
Registered User
 
Join Date: Aug 2017
Location: Texas
Posts: 35
Quote:
Originally Posted by redciv1 View Post
How much for the headlights.
Sent you a PM
CBRNWO is offline   Reply With Quote
Old 10-24-2019, 03:40 AM   #4
98 Arctic silver 986
 
tommy583's Avatar
 
Join Date: Jul 2011
Location: Upstate, NY
Posts: 1,441
Garage
Sent you a PM.
tommy583 is offline   Reply With Quote
Old 11-05-2019, 07:43 PM   #5
Vza
Registered User
 
Join Date: Oct 2018
Location: Nj
Posts: 171
Hi, Cup holders available.?
Vza is offline   Reply With Quote
Old 11-05-2019, 10:15 PM   #6
Registered User
 
Join Date: Aug 2017
Location: Texas
Posts: 35
Quote:
Originally Posted by Vza View Post
Hi, Cup holders available.?
Sending a PM
CBRNWO is offline   Reply With Quote
Old 11-09-2019, 01:16 AM   #7
Registered User
 
Join Date: Jul 2015
Location: Toledo, OH
Posts: 68
I need both covers for the IR sensors on the convertible latch, interested in headlight pics and what you'd need to get for them to be worth it for you.

Might also be in touch about the whole ecu/key swap. My keys were stolen right out of my running car in my driveway by the local "really nice guy who doesn't do lots of the bad drugs." but I need to figure out how this works with a pending court case/insurance/etc
hazardc is offline   Reply With Quote
Old 11-09-2019, 07:47 AM   #8
Registered User
 
Join Date: Aug 2017
Location: Texas
Posts: 35
Quote:
Originally Posted by hazardc View Post
I need both covers for the IR sensors on the convertible latch, interested in headlight pics and what you'd need to get for them to be worth it for you.

Might also be in touch about the whole ecu/key swap. My keys were stolen right out of my running car in my driveway by the local "really nice guy who doesn't do lots of the bad drugs." but I need to figure out how this works with a pending court case/insurance/etc
Sending PM
CBRNWO is offline   Reply With Quote
Old 11-09-2019, 10:11 AM   #9
Registered User
 
Join Date: Aug 2017
Location: Texas
Posts: 35
Listing parts from an '01 Boxster S. All parts worked prior to wreck. Everything is boxed for USPS shipment and listed on eBay. Sale may be easier through there, but cheaper here due to sellers fees. https://www.ebay.com/sch/i.html?sid=laxphatty&isRefine=true&_pgn=1

Below is what is currently available:
-ECU, MyGenius programmer, immobilizer, key remote/pill (detailed on another post)
-Key blade with door lock and ignition cylinder
-Heater Core
-ABS sensor
-Leather center console trim (from doing the GT2 delete)
-Wiper motor
-Brake pump
-Dash cluster cover pod
-A/C desiccator
-Fender intake vents (both sides)
-Driver mud flap
-Engine fan
-Radio equalizer
-Stereo bracket
-Dash center trim with vents
-Manual shifter housing
-Crank pulley
-Serpentine belt

Below are some parts I haven’t packaged/priced/listed yet. Let me know if something catches your eye:
-Airbag control module
-Headlights (LED kind from eBay. Need good cleaning and polishing but work fine)

Last edited by CBRNWO; 01-17-2020 at 07:41 AM. Reason: updated part availability.
CBRNWO is offline   Reply With Quote
Old 01-17-2020, 07:42 AM   #10
Registered User
 
Join Date: Aug 2017
Location: Texas
Posts: 35
update

Listing parts from an '01 Boxster S. All parts worked prior to wreck. Everything is boxed for USPS shipment and listed on eBay. Sale may be easier through there, but cheaper here due to sellers fees. https://www.ebay.com/sch/i.html?sid=laxphatty&isRefine=true&_pgn=1

Below is what is currently available:
-ECU, MyGenius programmer, immobilizer, key remote/pill (detailed on another post)
-Key blade with door lock and ignition cylinder
-Heater Core
-ABS sensor
-Leather center console trim (from doing the GT2 delete)
-Wiper motor
-Brake pump
-Dash cluster cover pod
-A/C desiccator
-Fender intake vents (both sides)
-Driver mud flap
-Engine fan
-Radio equalizer
-Stereo bracket
-Dash center trim with vents
-Manual shifter housing
-Crank pulley
-Serpentine belt

Below are some parts I haven’t packaged/priced/listed yet. Let me know if something catches your eye:
-Airbag control module
-Headlights (LED kind from eBay. Need good cleaning and polishing but work fine)
CBRNWO is offline   Reply With Quote
Old 01-20-2020, 01:38 PM   #11
Registered User
 
9864ever's Avatar
 
Join Date: Aug 2019
Location: Toronto
Posts: 103
Was the car hit at the front? Need some front structural pieces if you have.
thnx
9864ever is offline   Reply With Quote
Old 01-20-2020, 05:48 PM   #12
Registered User
 
Join Date: Aug 2017
Location: Texas
Posts: 35
Quote:
Originally Posted by 9864ever View Post
Was the car hit at the front? Need some front structural pieces if you have.
thnx
Car is gone. Just the listed parts remaining.
CBRNWO is offline   Reply With Quote
Old 02-05-2020, 03:20 PM   #13
Registered User
 
Join Date: Aug 2017
Location: Texas
Posts: 35
Bump

Bump. Car is gone, still have some parts ready to ship.
CBRNWO is offline   Reply With Quote
Old 02-05-2020, 03:26 PM   #14
Registered User
 
Join Date: Aug 2019
Location: Texas
Posts: 177
shifter housing? Like just the frame? Assuming you don't have the actual shifter, or the linkages?
What cost?
__________________
'97 - Silver (rebuilt/stripping)
'99 - Black (rebuilt/sold)
'01 S - Rainforest Green (daily)
'03 S - Orient Red (sold)
Fiddlebog is offline   Reply With Quote
Old 02-05-2020, 04:24 PM   #15
Registered User
 
Join Date: Aug 2017
Location: Texas
Posts: 35
Quote:
Originally Posted by Fiddlebog View Post
shifter housing? Like just the frame? Assuming you don't have the actual shifter, or the linkages?
What cost?
Sorry, forgot to remove that. It sold on eBay yesterday.

I'll update the list.
CBRNWO is offline   Reply With Quote
Old 02-05-2020, 04:25 PM   #16
Registered User
 
Join Date: Aug 2017
Location: Texas
Posts: 35
Update

Listing parts from an '01 Boxster S. All parts worked prior to wreck. Everything is boxed for USPS shipment and listed on eBay. Sale may be easier through there, but cheaper here due to sellers fees. https://www.ebay.com/sch/i.html?sid=laxphatty&isRefine=true&_pgn=1

Below is what is currently available:
-ECU, MyGenius programmer, immobilizer, key remote/pill (detailed on another post)
-Key blade with door lock and ignition cylinder
-Heater Core
-ABS sensor
-Leather center console trim (from doing the GT2 delete)
-Wiper motor
-Dash cluster cover pod
-A/C desiccator
-Fender intake vents (both sides)
-Driver mud flap
-Engine fan
-Radio equalizer
-Stereo bracket
-Dash center trim with vents
-Crank pulley
-Serpentine belt

Below are some parts I haven’t packaged/priced/listed yet. Let me know if something catches your eye:
-Airbag control module
-Headlights (LED kind from eBay. Need good cleaning and polishing but work fine)
CBRNWO is offline   Reply With Quote
Old 02-05-2020, 04:34 PM   #17
Registered User
 
Join Date: Aug 2019
Location: Texas
Posts: 177
Those are some good prices. Don't need any of it, but GLWS

Hadn't realized the steering lock was worth anything by itself. I've got an extra somewhere I should probably try selling.
__________________
'97 - Silver (rebuilt/stripping)
'99 - Black (rebuilt/sold)
'01 S - Rainforest Green (daily)
'03 S - Orient Red (sold)
Fiddlebog is offline   Reply With Quote
Old 04-05-2020, 12:31 PM   #18
Registered User
 
Join Date: Aug 2017
Location: Texas
Posts: 35
Prices significantly dropped. Availability update:

Below is what is currently available:
-ECU, MyGenius programmer, immobilizer, key remote/pill (detailed on another post)
-Key blade with door lock and ignition cylinder
-Heater Core
-ABS sensor
-Wiper motor
-A/C desiccator
-Fender intake vents (both sides)
-Engine fan
-Stereo bracket
-Dash center trim with vents
-Crank pulley
-Serpentine belt

-Headlights (LED kind from eBay. Need good cleaning and polishing but work fine)
CBRNWO is offline   Reply With Quote
Old 04-13-2020, 06:38 PM   #19
Registered User
 
Join Date: Aug 2016
Location: Trussville, Alabama
Posts: 39
Garage
Interested in the headlights and belt. Left PM.
BhamBox is offline   Reply With Quote
Old 04-18-2020, 08:29 PM   #20
Registered User
 
Join Date: Aug 2017
Location: Tucson,az
Posts: 690
how much for the side intake vents, Thanks Frank

flmont is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page