986 Forum - The Community for Porsche Boxster & Cayman Owners
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Boxster and Cayman Parts for Sale or Wanted (http://986forum.com/forums/boxster-cayman-parts-sale-wanted/)
-   -   Parting a 2001 boxster S with 33K miles (http://986forum.com/forums/boxster-cayman-parts-sale-wanted/58464-parting-2001-boxster-s-33k-miles.html)

Deadeye 10-07-2015 03:25 AM
Quote:
Originally Posted by jcslocum (Post 468852)
What does the shifter look like and is the steering wheel a 3 spoke?
Shifter is excellent. Send pm with your email & I will send you a pic. It is a 3 spoke wheel, but I may keep it for my 993. Make me an offer.

Deadeye 10-07-2015 03:28 AM
Quote:
Originally Posted by Cslaedd (Post 468988)
Do you have the actuators for the hood and trunk? do they still work?
Yes, I have all the parts for front & rear deck release mechanisms. Can you PM pics or part #'s so we are on the same page?

Deadeye 10-07-2015 03:30 AM
Quote:
Originally Posted by Nystanlycup (Post 469003)
Do you have the rear spoiler lip? Would it fit on a Base? And what color?
Thanks!
Color is guards red. No lip, just the cap if that's what you mean.

Ckrikos 10-07-2015 09:19 PM
Do you have the 3 plastic cowls that cover the strut towers and battery?

Thanks


Sent from my iPad using Tapatalk

Deadeye 10-08-2015 03:44 AM
Quote:
Originally Posted by Ckrikos (Post 469148)
Do you have the 3 plastic cowls that cover the strut towers and battery?

Thanks


Sent from my iPad using Tapatalk
Yes, all 3. Also all the rest of the frunk liners. $40.00 + shipping & paypal fees.

Deadeye 10-20-2015 02:39 PM
Quote:
Originally Posted by captainski (Post 468966)
2001 Boxster S I need Driver side good and clear headlight, also same side headlight sprayer the little black things that cost over $ 170.00 to buy the unit complete. I just need the one sprayer.
New to Porsche and to the Forum.

Thanks

The Captain
I have 3 pair of clear headlights. Will separate. No headlight washers

euskalkubatarra 10-21-2015 07:16 PM
I need the lids for the door compartments in black as well as the upper plastic door pull trim, in black also. I also need the front trunk compartment cover that covers the hood latch area. If clarification of the parts is needed, I can post pictures. Can you PM me availability and pricing? Thanks!

AaronPDX 10-21-2015 08:26 PM
Hi, I'm interested in a pair of clear headlights. Can you tell me the price?


Sent from my iPhone using Tapatalk

Deadeye 10-22-2015 02:29 AM
Quote:
Originally Posted by euskalkubatarra (Post 470613)
I need the lids for the door compartments in black as well as the upper plastic door pull trim, in black also. I also need the front trunk compartment cover that covers the hood latch area. If clarification of the parts is needed, I can post pictures. Can you PM me availability and pricing? Thanks!
The door cards are near perfect and I don't want to cannabilize for individual pieces, but I do have the front hood latch piece and will pm you with price.

Dennis

Deadeye 10-22-2015 02:40 AM
Quote:
Originally Posted by AaronPDX (Post 470618)
Hi, I'm interested in a pair of clear headlights. Can you tell me the price?


Sent from my iPhone using Tapatalk
$175 plus shipping and paypal fees for the pair

mipstien 10-22-2015 05:25 AM
Do you still have the fuel tank bleeder valve?

Deadeye 10-22-2015 06:10 AM
Quote:
Originally Posted by mipstien (Post 470647)
Do you still have the fuel tank bleeder valve?
I have not got that deep into disassembly yet, buy it should be there. Do you have the part #?

mipstien 10-22-2015 06:22 AM
996-201-143-01-M100
that link has all the info too

cribfiller 10-22-2015 06:28 AM
Pair Clear Headlights
 
I am interested in a pair of clean clear headlights, do they have the clear corners?

alm001 10-22-2015 06:31 AM
I'm looking for an upper dash pocket, not for the bottom opening.

Deadeye 10-23-2015 02:38 AM
Quote:
Originally Posted by cribfiller (Post 470654)
I am interested in a pair of clean clear headlights, do they have the clear corners?
Not clear corners. All are amber.

Josephjochoa 10-23-2015 08:49 AM
Do you have the cats? Primary and secondary?

Deadeye 10-23-2015 12:10 PM
Quote:
Originally Posted by Josephjochoa (Post 470838)
Do you have the cats? Primary and secondary?
Yes, complete exhaust. Send me a pm with email address for price and pics. I will be out of town foe a few days, but can get to it next week.

Ckrikos 10-29-2015 05:27 PM
Funds sent on the cowls.

Deadeye 10-29-2015 07:01 PM
Quote:
Originally Posted by Ckrikos (Post 471640)
Funds sent on the cowls.
Parts shipped today

BrokenLinkage 10-30-2015 09:19 AM
1)Looking for driver-side door exterior seal (the long one that runs from the window base all the way under the door. Would need to be functionally and cosmetically excellent; my current one is fine but does't quite lie flat at the window base due to some molded-in ripples in the rubber.
2)Looking for inner windshield trim piece - across the top, under the visors and map light, part no 98655505901A03, in great shape with the soft-touch black finish not scuffed up. Would like to mod one up to accept radar detector.
Thanks

Deadeye 10-30-2015 04:16 PM
Quote:
Originally Posted by BrokenLinkage (Post 471708)
1)Looking for driver-side door exterior seal (the long one that runs from the window base all the way under the door. Would need to be functionally and cosmetically excellent; my current one is fine but does't quite lie flat at the window base due to some molded-in ripples in the rubber.
2)Looking for inner windshield trim piece - across the top, under the visors and map light, part no 98655505901A03, in great shape with the soft-touch black finish not scuffed up. Would like to mod one up to accept radar detector.
Thanks
I have the door seal in excellent condition. Will check part # of map light. No windshield trim. PM email for pics

Ckrikos 10-31-2015 09:34 AM
Got them today thanks. They were packed very well.

flouese 11-02-2015 06:08 AM
Do you have an "idle air control" valve? (1999 986 2.5L base)
Are the head lights still available?

VRsyncro 11-02-2015 04:05 PM
Hoping you have the carpet trim that is directly under the center console in Black.

Part# 996.552.114.02 + 996.552.113.02

Also need the black carpet part that covers the fuse panel. (kick plate)

Let me know!

Mike

Deadeye 11-02-2015 05:15 PM
Quote:
Originally Posted by flouese (Post 472003)
Do you have an "idle air control" valve? (1999 986 2.5L base)
Are the head lights still available?
Yes, I do still have a pair of headlights. Do you have a part# for idle control valve?

Deadeye 11-02-2015 05:24 PM
Quote:
Originally Posted by VRsyncro (Post 472083)
Hoping you have the carpet trim that is directly under the center console in Black.

Part# 996.552.114.02 + 996.552.113.02

Also need the black carpet part that covers the fuse panel. (kick plate)

Let me know!

Mike
Yes, I have all 3 in excellent condition. $90.00 plus shipping & fees

VRsyncro 11-03-2015 02:55 AM
Quote:
Originally Posted by Deadeye (Post 472095)
Yes, I have all 3 in excellent condition. $90.00 plus shipping & fees
PM Sent with shipping details, etc...

flouese 11-03-2015 03:23 AM
Deadeye,
Sorry about all the questions. Will the headlights fit a 99 base? Are there burn marks on them? What do you anticipate cost of shipping to 32011 be? Found an idle air control valve.

Deadeye 11-03-2015 03:25 AM
Quote:
Originally Posted by flouese (Post 472124)
Deadeye,
Sorry about all the questions. Will the headlights fit a 99 base? Are there burn marks on them? What do you anticipate cost of shipping to 32011 be? Found an idle air control valve.
You have a PM

flouese 11-09-2015 05:03 PM
Have any O2 sensors for a 99 base?

Deadeye 11-10-2015 02:20 AM
Quote:
Originally Posted by flouese (Post 472983)
Have any O2 sensors for a 99 base?
Fred, I have the 4 I just removed from the '01 and I think I still have all 4 (need to dig into some bins) from a '99 I dismantled a few months ago. Not sure if they are the same.

CaryNC986 11-10-2015 06:29 PM
-front passenger control arm if you have one in good shape
-shifter assembly if there's no play in it. My '99 has tons of "slop". (5spd manual 2.5L base.)
-black passenger sun visor

Thanks!
Ramish

Deadeye 11-11-2015 02:23 AM
Quote:
Originally Posted by CaryNC986 (Post 473109)
-front passenger control arm if you have one in good shape
-shifter assembly if there's no play in it. My '99 has tons of "slop". (5spd manual 2.5L base.)
-black passenger sun visor

Thanks!
Ramish
I have the control arm & shifter. No visor. Semd me a PM with email for pics and price.

cellkid22 11-11-2015 03:22 AM
Hi

Do you still have both rocker panels?

Thanks

Deadeye 11-11-2015 05:52 AM
Quote:
Originally Posted by cellkid22 (Post 473128)
Hi

Do you still have both rocker panels?

Thanks
The plastic sill protectors or the inner pieces with bin on pass side and lid switches on drivers? I have both in excellent condition.

cellkid22 11-11-2015 08:55 AM
The exterior panels that go from front wheel well to rear wheel under doors

Quote:
Originally Posted by Deadeye (Post 473141)
The plastic sill protectors or the inner pieces with bin on pass side and lid switches on drivers? I have both in excellent condition.

Deadeye 11-11-2015 02:09 PM
Quote:
Originally Posted by cellkid22 (Post 473165)
The exterior panels that go from front wheel well to rear wheel under doors
This car does not have bolt on rockers.

Hammerhead2501 11-16-2015 07:21 AM
Parts
 
Need the rear storage shelf that goes behind seats and over engine cover.

Deadeye 11-16-2015 01:13 PM
Quote:
Originally Posted by Hammerhead2501 (Post 473776)
Need the rear storage shelf that goes behind seats and over engine cover.
The shelf I pulled from this car has the built in speakers. Is this what you are looking for?


All times are GMT -8. The time now is 11:43 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website