I don't have a three spoke, sorry. I do have some 4 spoke tip steering wheels though
I have one for $50 shipped

Itsnotanova
Woody,

Thanks for taking the time to look.

I will wait for now.
If you happen to get on in, please keep me in mind.

Thanks again.
MNC-I

I am looking for the top of the ebrake cover. Mine met an untimely end. Its the little Black or silver part that pops off


http://986forum.com/forums/uploads01...1421887619.jpg

driver seat cushion cover bottom - black leather
 

Hi Woody,

Greetings. Looking for the driver seat cushion cover in black leather. One of your photos of the gray Boxster shows the black leather cover.

Would that be available? I only need the bottom cushion cover as my other covers are fine. Price?

I may have other items I need will know in the next few days. Checking with you on the first item I have come across.

Thanks.

I have one off a 99 for $20 shipped
I'm completely out of good seats.. sorry

I need one nut for the rear tail lights.

Understood, Woody. Please keep it on your list and let me know as soon as you have it.

Btw, by chance do you have any key fobs? Mine is a 3 button key for my 2004 Boxster.

-- Mahendra

[QUOTE=itsnotanova;432813]I have one off a 99 for $20 shipped


Ok I will take it sending PM

I have a $15 minimum. Is there anything else you would want? I'll throw in the nut.
I don't have any extra keys that are worth buying..sorry

[QUOTE=Run;432993] I'm about to send you a request through paypal. I had to make sure I got it off without breaking it...thanks

Woody,

I just need the internal PCB for the 3 button key fob. If I get a couple of broken ones I could try and make one by salvaging parts. I am somewhat handy with electronics. I know it will need programming then...http://986forum.com/forums/uploads01...1422155129.jpg

This is how my key fob looks like...let me know...Thanks.

Cigarette lighter?

Sorry to tease you but I took a closer look at the key I have, and its a two button. :o
I have a real nice one. 9.75 out of 10! $20 shipped along with one taillight nut.

Sounds good to me. PM your PayPal info.

Thanks!

Parts Required 2002 Boxster
 

Hi,

1. Roll bar wind inserts (Mesh like).
2. Wind deflector.
3. Silver Button for a tiptronic shifter.
4. Center console storage shelf.

Thanks
Terry

Got my stuff today. That was quick, the lighter looks new and thanks for throwing in the extra nut. Good seller!

Do you have a convertible top motor 98662411700?
Thanks!

Yes $40 shipped
Thank you. I've read your threads about your Boxster and it sounds like it will be real nice when you're done with it.
I just sent you another PM about the wheels...thanks

Passenger side air intake vent
 

I am looking for the passenger intake. I didn't look through all your posts, just asking.

Joe

Litronic Components Needed
 

Woody,

I responded to your PM. Here are pictures of the parts I need.

I already have the brackets and sensors, but I'm still searching for the wiring. Please let me know what you have and pricing information. Thanks.

http://986forum.com/forums/uploads01...1423417822.jpg

http://986forum.com/forums/uploads01...1423418053.jpg

I have everything in both pictures. You only want the wiring harness and not the sensors that attach to the control arms or the control box that's at the bottom of picture two? I looked at the wiring involved and it looks like it ties into the main harness right in front of the cabin filter. The back sensor wiring connects into the main harness at the ECU area. I'll cut them where they connect at the main for $75 shipped. Text me at 512-925-9171 if you're interested

OK - I'll text you tomorrow. Thanks

+1 for Woody, hes a great guy. Purchased several parts from him a couple of weeks ago and couldnt be happier.

Front L/R catalytic converters to fit '02 Manual Boxster 2.7L, please?

Thank you!

Each converter (exhaust manifold or secondary pipe) is $50 plus shipping. So if you needed all four, it would be $200. PM me or call/text me at 512-925-9171


Just a heads-up, I'm picking up a 2000 996 on Tuesday. I'm on the fence about keeping the 3.4 and cluster for myself

Do it!! What year Boxster are you driving.

Well I guess I should "let the cat out of the bag". I don't have a Boxster of my own yet. :o I was waiting for the right one to come around at the right time. I first got introduced to Boxsters about two years ago with a flooded 2000 S I bought at auction. The only reason I bought it was for the calipers so I could put them on my 911SC. I started selling parts off the boxster to recoup my money. At that time, buying and selling car/truck parts was strictly a hobby to pay for my car hobby. I quickly fell in love with the Boxster and the Porsche community. The Porsche clientele were a lot better to deal with than other makes and models clientele. From that first Boxster on, it just snow balled to what I have now. I've always wanted a Boxster but didn't want to afford one. I've also not had one come along that caught my interest. There was always something wrong a particular car that would keep me from keeping it as my own. Too damaged, too many miles, Parts Only Title, tiptronic, or a 2.5. I want a good 3.2 6 speed without too many issues ,but haven't found any at a good price.
Of course this 996 I just bought might change that. A 3.4 is better than 3.2!! I do have a 97 that wouldn't take much to bring back from the dead. I have everything to turn the 97 into an S except a good motor. The weather here is going to be sucky for a while, so it might be awhile before I can get the 3.4 out and check its condition. Stay tuned!

Forgot to add, I'm also picking up a GT3 bumper and side skirts when I go pick up the 996. I've also been stashing some aftermarket parts as they come in. Headers, mufflers and tinted taillights. I have a Dansk muffler that I'm more than likely going to sell. I watched a video of someone with a 3.4 swap and he had a Dansk muffler on his. It wasn't aggressive enough for me. I need to hear it in person first before I decide if I want to get rid of it.

Very cool. I do wish you lived closer. I would be over kicking tires at your place and would enjoy watching the pending 3.4 project.... when it starts. That would require a separate progress thread.

Texted you, please let me know how to make the transaction?

+27 for Woody! Great replacement coolant reservoir at a very nice price. ;-)

PM me.
looking for a 6 speed out of an S model
also matching shifter and cables.
Shipped to buffalo, NY

I need one of the headlight mounting brackets. I think the right one. They work now but the part that holds the connector is broken. Just makes it harder to our back in. I could also use the cover for the inside light.

Pics of the 996 build !

I have the headlight mount for $40 shipped. I don't have any inside covers

I just got this in. It's a 2000 with 120,000 miles and it had a fire behind the motor. The motor is mostly untouched. I'm still trying to figure out what happen and haven't even checked to see if I can manually turnover the motor. The starter doesn't turn it over or even click. I'm thinking either the catalytic converter got too hot or some kind of electrical short? I'm still on the fence about using the 3.4 or selling it. I did offer it to a friend who needs one for his 99. The 996 has a "parts only" title, so I'll be parting it out. I have buyers for the headlights already.
http://i765.photobucket.com/albums/x...psmdcybebt.jpg
http://i765.photobucket.com/albums/x...pswxe04dj8.jpg
http://i765.photobucket.com/albums/x...psxorlps70.jpg
http://i765.photobucket.com/albums/x...psijqzohhw.jpg
http://i765.photobucket.com/albums/x...psnmy6lxbx.jpg

How about the whole inside light and sensor assembly?

I like your playground.

Thanks you
I have some amber headlights that have burn marks on the inside and are yellow on the outside. $25 plus shipping each

Could you get pictures of the headlights? I am wanting an extra set to hack up and see if I can make a projector project.

Hi,
Would you have a driver's side inside door panel in black with a non-Bose door speaker opening? Base not S model. Shipping to 92614

http://i765.photobucket.com/albums/x...ps4mag7tux.jpg
http://i765.photobucket.com/albums/x...psw41d4ruj.jpg
http://i765.photobucket.com/albums/x...psvwop1p47.jpg
The left one has a chipped edge
I should, $75 shipped. I need to see what style you have because there are a few different types. Send some pictures to 512-925-9171

Woody, are those exhaust tips on the 996 stock? could we get a pic? I'm looking for some aftermarket, larger diameter, chrome tips for my 2001 996. thanks.