Hi Woody! Hopefully you are surviving hurricane season. Would you have a low mileage right axle for a 99? The right inner CV joint bit the dust the other day. Not going to pay $800 for a new one. Thought about buying a new CV joint from Pelican and putting it on $80. Not sure how difficult that would be. Do you have any advice experience with this?

I don't have any manual or S axles as the spec or WRL guys buy all those. I have a few base tiptronic axles for $50+shipping each. I'd recommend going with the pelican joint if your outer joint is good. It's a real easy fix. Messy but easy

Woody; I'm thinking about converting my 98 to the later model top transmissions. I'd need the transmissions and the standoff bolts. Got any low mileage ones available?

I sell the transmissions for $50 each but they're all a crap shoot at this point. I'd throw in the bolts for free. Why do you want to switch?

Mine are getting a bit jerky about halfway back, and I like the smoothness of the later transmissions. Just drove an 02 and night and day diff.

Woody do you have any rear bumper screws for a 986 01 S?

Hi,
I'm sure I have one and that's something I would throw in for free if you were ordering something more significant. Otherwise my minimum is $20 shipped.
Thanks Woody

Drivers door latch for an 03 base?

Also frunk latch?

I sell the door mechanism for $50 and the front latch for $20 plus shipping

Sounds good to me. Do you mind shipping them next day air?

Pm sent

Sure but that can be stupid expensive. Please text me at 512-925-9171 so I can send you pictures. Thx

Hi,

looking for a few things if you have them, going in an 01 Boxster S...

Passenger door lock mechanism, window regulator, micro switches
Drivers window regulator and microswitches
Charcoal canister
6 speed shifter boot
oem SSK
clean black center console

shipped to 23220

Thanks!

Hi
I'm looking for 2 front lower control arms for an 02 Boxster Base Standard Suspension.
The lower the mileage and the better the condition, the better.
Shipped to 90717
thanks!

The lowest I have has 55K on them. $40+shipping for the pair. Unless you're in a bind, I wouldn't suggest buying them.

I'm a noob to Pcars.....should I only install new ones?

tan seats?
 

Looking for a pair in good shape, no repairs needed, for an 03 base. Los Angeles.

I would if I were you. I'd also suggest replacing the control arm links too.

Sorry I don't have any

Thanks for that, Woody.

Hey Woody, noobie here. Appears that the previous owner might've not gotten frunk latched properly and had what I can only imagine as 5 seconds of terror. Windshield has obviously been replaced judging by the poor job of fitting the molding trim and gas shock tops damaged. Anyway, hood I have is reworkable but dented at the windshield edge. Looking for a black bolt in and go replacement for an 01 shipped to Iowa.

Woody I'm hoping you can help me out... Last night I put my key in the door lock and turned it, the door unlocked but the key would not turn back to center or come out. So I spent my Sunday evening in the parking lot of Wal-Mart taking off my door panel and removing the lock assembly. When I got it out it pretty much fell apart.

Attachment 21120
Attachment 21121

I'm pretty sure I need everything but the tumbler to fix this and a doorlock itself as my actuator stopped working a while ago.

98 Boxster Base

Thanks in advance.