If you are wanting the plugs on the back of the padding that keep the padding attached to the rollbar, that will be $20 shipped. $20 shipped is my minimum for anything. There's a total of 8. If you're wanting the three pieces that hold the center wind deflector in, you'll want to buy those new.
Thanks woody

If we're talking about the same thing, I managed to get it done. The front side marker light connector plug. A friend told me to check VW. So I passed by Pull-a-Part and got a couple off a later model VW. The spade connectors were the same but the housing was too big. So I cut it down to fit, wired it in and looks like it will work. Little extra electrical tape and she's done.
What I do need is the triangular reflector on the driver's side headlight. Got one? Also, the "ash tray" lid stays open - can't close it. Is there a trick to fixing it? Replace it? Thanks.

You'll have to buy those corner pieces new. Try cleaning the area where the lid mechanism is. Sometimes that helps. If I have a good working ashtray It's going to be $50 ,but I'd suggest a new smoker delete for almost the same price.

Thanks! Appreciate your advice.
How about the driver side sun visor?

Wind deflector and cup holder
 

Hi, Looking for all 3 wind deflectors and a single cup holder for a 2002 boxster S.

Sorry I'm out of all of those for now. It's best to follow my facebook page Woody's Parts LLC and call dibs on them when they come in
I have lots of visors but they're all missing the cover.

I see that I'm not the only one in line for those elusive lexan wind deflectors. Maybe I'll have to get out the jig saw. ;)

Do you have a black convertible top, preferably with a glass rear window?
Thanks,

I have the lexan, but not the frame (swapped in Fred's illuminated lexan). Probably not much use to you without the frame.

Thanks, but like you said. :)

Sorry guys I've been down by the boarder for the last few days where there's not really good phone reception. Please text me if you're needing anything as I'll be gone tomorrow and Saturday too. I don't have any good tops right now
Thanks Woody

A couiple Things
 

I need an exhaust tip that will fit a 2003 boxster S and the skid plate for the drivers door. The plate that holds the trunk/hood release and seat memory buttons with the buttons in it or without. Thanks

Hello do you have any owners manuals etc 02 986 base

Woody. Looks like I need : Frunk trim panel and plastic pins that cover the gap between the Frunk latch and bumper. Mine is completely missing. Thanks

You'll have to buy that new. The rubber is usually brittle and broken off on these cars from Texas. I believe they're not that expensive

Woody I sent you a PM let me know please . Thanks in advance .

My headlights are burned under the lens. Do you have a decent set of headlights?

Edit: Pat said that you said I owe him a beer. You're right. That hood was a tighter fit in that Wrangler than I thought it'd be. :)

Chris

Hi Chris,
It was a tight fit. I had to take the hinges off the hood and we had to move all kinds of things to get it in there. Luckily he only had to drive an hour with that thing. To answer your question, sorry headlights go quick. Even the ugly ones! The spec guys eat up most of my body parts. Have you looked into those projector lights Fred makes?

Hey Woody,
99 base I need a pair of rear struts.

Hey Woody, if you have one, can you send me a price shipped to 06074 for the plastic cowl piece under the wipers? Mine is broken on both sides where the 10mm nuts go.

Thanks