Part needed. Tube from AOS to TB
I need the flexible tube that goes from the aos to the throttlebody.. Anybody have one for me.
djmanjay@yahoo.com J |
Quote:
I may have one from the time I replaced my AOS. I'll have to look in the garage to see if I kept it. It's from a 1998 986 2.5 engine, so not sure if it would fit your 3.4. Regards, Maurice. |
J Tube
If it's known ad the J Tube, I have a brand new one. I bought it when I bought all of the AOS parts but didn't need to replace it. It's still in the bag. My car is the 2001 S
I'll take a picture and post it. -Steve |
A pic would be great. Thanks guys. Mo I think the 2.5 tube will work also. I broke the fitting on mine the other day. :(
|
J Tube
Is this what you're looking for?
|
Yes and no. It is the tube but there is another version that has a flexible tube on it. I think I need that one. Thanks for taking the time to take the picture though...
|
J Tube
has the part been upgraded???
|
nope.. Just on a 2.5 or a 3.4 there is no bend in the T that the TB connects to so it has to be a different shape. Ill try and find a photo.
|
Can you look at the attached picture and let me know which one you need, I probably have a couple new ones at my shop.
Thanks! |
Wow! Thanks. I need one #5 with side of fries :) Let me know if it is for the 2.5 or a 2.7/3.2 I need one for a 2.5. The intake plenum sits differently on the 3.4 than the 2.7/3/2 Thanks in advance...
|
Quote:
|
Quote:
I found my old "j-tube", part #5 in the diagram. The tube itself is in good shape, but the clip on one side is kaput, with the O-ring intact. It is from a 2.5. Here are two photos of the part, including the broken clip: http://i44.tinypic.com/zn6bdk.jpg http://i44.tinypic.com/2198g7c.jpg Don't know if you can use one of the clips from your part, but if you can use it, it's yours. Regards, Maurice. |
Mo... Your the man. I have other ends that I can put on it so the clip will work. I am going to be in your neck of the woods tomorrow night/afternoon. Let me know if you will be around. Or if your not doing anything I have to go to Giants/Jets stadium to do a floor plan for the Jets draft party on Thursday. So if you want a free tour of the stadium and the VIP areas that is where I am going tomorrow. Let me know :)
|
Quote:
I'll be around. I'll send you an e-mail with my number. Regards, Maurice. |
All times are GMT -8. The time now is 10:07 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website