Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster & Cayman Detailing Discussion

Post Reply
 
LinkBack Thread Tools Display Modes
Old 11-18-2015, 11:00 PM   #1
Registered User
 
kenand1988's Avatar
 
Join Date: May 2015
Location: Phoenix
Posts: 30
Preventing chips on front bumper from getting bigger

What are my options here? I have two silver dollar sized spots on the front of the bumper where the clear coat has completely separated and flaked off. It leaves an unsightly halo around the spots where you can see the clear coat continuing to separate. Car washes seem to be making the spots bigger and bigger. First off, has anyone had their front bumper repainted and could tell an honest price to expect. (you can PM me). Is there something I can do, that doesnt look hideous, to at least temporarily stop the size of the spots getting bigger? Also have a spot on the driver side mirrior, on the front of it.

__________________
Current:
2001 Porsche Boxster
Past:
2001 Toyota Celica, 1997 Miata, 1999 323is,
1995 Toyota Pickup, 1997 Subaru Legacy
kenand1988 is offline   Reply With Quote
Old 11-19-2015, 12:12 AM   #2
still plays with cars...
 
BoxsterSteve's Avatar
 
Join Date: May 2011
Location: Baden, ON, Canada
Posts: 1,087
Garage
You are likely looking at a respray. I've had a clear coat only respray done once, and it worked well,but the car was less than 2 years old and had no road rash that would telegraph through the new paint.
I'd count on $500-700 for a quality job.
__________________
Six speed 2000 Boxster S
Arctic Silver on Metropol Blue | LN Dual Row IMSR | Arctic Silver console, spoiler frame & bumperettes | Crios mod | Technobrace | RoboTop module & modified convertible top relay for one-touch roof operation
BoxsterSteve is offline   Reply With Quote
Old 11-19-2015, 03:32 AM   #3
Registered User
 
Join Date: Sep 2015
Location: St. Petersburg, Florida
Posts: 336
It really depends a several factors. There's really not an attractive way to stop the flaking. I've seen folks apply the 3M clear film before, but it's not a long-term fix.

Regarding the cost of repainting, if you can remove the front bumper cover yourself, you'll save a lot of money. If you just want an average fix, take it to one of the national chains. If you want a quality job, take it to a well known independent shop. Painting could range from $200 - $600 I would think, depending on the shop and quality of labor/materials.
__________________
1998 Porsche Boxster - Ocean Jade Metallic

1985 Porsche Carrera Targa - Guards Red

1978 Porsche 911SC Euro Non-Sunroof - Grand Prix White
Seadweller is offline   Reply With Quote
Old 11-19-2015, 04:37 AM   #4
Motorist & Coffee Drinker
 
78F350's Avatar
 
Join Date: Jul 2014
Location: Oklahoma
Posts: 3,653
Garage
I pretty much concur with Seadweller. The cost to repaint will vary a bit, but here, its $300-$500 depending on how much prep is needed and how much you shop around.
On one of my old Hondas, I feathered the clear coat back and resprayed it. It looked good from about 10 feet and was starting to peel again in about 6 months. Keep in mind that if you try to mend it yourself, you could end up making it more work for a pro to refinish later.
__________________
I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
78F350 is offline   Reply With Quote
Old 11-19-2015, 04:40 AM   #5
Registered User
 
Join Date: Sep 2013
Location: California
Posts: 466
Not much to do except a respray.

I cringed when you menitoned taking it thru a car wash, I would never recommend taking any car, other than a beat up thing, thru any car wash, okay a hand car wash would be acceptable, but machines Over My Dead Body/
__________________
"Blind acceptance is a sign, of stupid fools who stand in line."
Slate 01 is offline   Reply With Quote
Old 11-19-2015, 06:50 PM   #6
Registered User
 
kenand1988's Avatar
 
Join Date: May 2015
Location: Phoenix
Posts: 30
Thanks for the input, consensus seems to be right around 500. Its a long shot but does anyone have any suggestions for a paint shop near Phoenix? I can remove the bumper and the little inserts myself. I've already done it before. I can sand it myself too but I think I should let a pro do it.

I'm leaning towards cost effectiveness so maybe a national chain, but I'm worried they won't get the metallicness of the paint right. How good are big name places? Is it truly worth spending another 2 or 300 dollars to go to an independent shop?
__________________
Current:
2001 Porsche Boxster
Past:
2001 Toyota Celica, 1997 Miata, 1999 323is,
1995 Toyota Pickup, 1997 Subaru Legacy

Last edited by kenand1988; 11-19-2015 at 06:56 PM.
kenand1988 is offline   Reply With Quote
Old 11-19-2015, 07:01 PM   #7
Registered User
 
Join Date: Nov 2013
Location: Emerald City
Posts: 885
Garage
If you don't care what it will look like take it to.maaco. If you want it to look flawless then a top local place is where you want to go.

If you take your boxster through an automatic car wash, you need to stop. If nothing else for the top which is not designed to deal with high pressure soap getting into the canvas.
jdraupp is offline   Reply With Quote
Old 11-19-2015, 08:58 PM   #8
Registered User
 
kenand1988's Avatar
 
Join Date: May 2015
Location: Phoenix
Posts: 30
Quote:
Originally Posted by jdraupp View Post
If you take your boxster through an automatic car wash, you need to stop. If nothing else for the top which is not designed to deal with high pressure soap getting into the canvas.
Hm, I'm kind of stuck then... I use a conditioner on the top to hopefully nullify going through a car wash but out here in the desert our water is really really really hard, so using a garden hose to wash the car would be terrible for the car and im not an eccentric rich guy whose gonna buy gallons of water purely to dump on my car.
__________________
Current:
2001 Porsche Boxster
Past:
2001 Toyota Celica, 1997 Miata, 1999 323is,
1995 Toyota Pickup, 1997 Subaru Legacy

Last edited by kenand1988; 11-19-2015 at 09:02 PM.
kenand1988 is offline   Reply With Quote
Old 11-20-2015, 03:48 AM   #9
Registered User
 
Join Date: Sep 2015
Location: St. Petersburg, Florida
Posts: 336
If you don't mind the initial investment, you could address your water problem with one of these (or similar):

Spot Free Water Softener for your Boat
__________________
1998 Porsche Boxster - Ocean Jade Metallic

1985 Porsche Carrera Targa - Guards Red

1978 Porsche 911SC Euro Non-Sunroof - Grand Prix White
Seadweller is offline   Reply With Quote
Old 11-20-2015, 05:26 AM   #10
Registered User
 
Join Date: Nov 2013
Location: Emerald City
Posts: 885
Garage
Quote:
Originally Posted by kenand1988 View Post
Hm, I'm kind of stuck then... I use a conditioner on the top to hopefully nullify going through a car wash but out here in the desert our water is really really really hard, so using a garden hose to wash the car would be terrible for the car and im not an eccentric rich guy whose gonna buy gallons of water purely to dump on my car.
No self service car washes by you? The old fashioned kind with the coin and the wand?

I use optimum no rinse wash. You can get it on amazon. All you need is a five gallon bucket with two gallons of water, a wash mitt and some microfiber drying towels. No hose needed. I have a hose and I don't use it because the no rinse stuff is easy and looks great.
jdraupp is offline   Reply With Quote
Old 11-20-2015, 08:13 AM   #11
On the slippery slope
 
JayG's Avatar
 
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,793
Garage
Quote:
Originally Posted by jdraupp View Post
No self service car washes by you? The old fashioned kind with the coin and the wand?

I use optimum no rinse wash. You can get it on amazon. All you need is a five gallon bucket with two gallons of water, a wash mitt and some microfiber drying towels. No hose needed. I have a hose and I don't use it because the no rinse stuff is easy and looks great.
Don't even need the bucket and water

Get a 1 or 2 gallon pump sprayer from Home Depot or Lowes. Do the mixing in the sprayer. Just do a light spray on the car, wipe with a microfiber towel and dry. I sometimes do 2 wet/wipe processes and then dry. I use 1 -2 quarts to wash the car and virtually no water on the ground. You can easily do it in your garage

With the 2 gallon sprayer, I get 6-8 washes per fill up

They make 2 versions of Optimum NoRinse
Blue - Wash and shine
Green-Wash and Wax

I use the green, they add a little carnauba wax to their mix
You can also mix it to use as a clay lube or detail spray
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
JayG is offline   Reply With Quote
Old 11-20-2015, 09:59 AM   #12
Motorist & Coffee Drinker
 
78F350's Avatar
 
Join Date: Jul 2014
Location: Oklahoma
Posts: 3,653
Garage
I recently started using 'Meguiar's G3626 Ultimate Wash & Wax Anywhere Spray' on my helicopter at work and am getting some for my cars. Just spray it on and wipe with a microfiber cloth. It cleans off the bugs pretty well and prevents them from sticking so much in the first place. Also helps cut down on soot build-up behind the exhaust. No water needed.
__________________
I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
78F350 is offline   Reply With Quote
Old 03-24-2017, 08:24 AM   #13
Lew
So Blessed!
 
Lew's Avatar
 
Join Date: Nov 2016
Location: SE Georgia
Posts: 389
Garage
I never use water from a hose on my car. I do all the cleaning in my garage where it stays and under a cover. I don't drive it in bad weather. I will clean the outside at times using my duster first over a fender, etc., then with water in a spray bottle wet a microfiber towel and wipe down the area. After that I will spray on Mother's spray wax and buff with a clean microfiber towel...The paint looks like new!
I also never wet my wheels. Just wipe down and when needed, I use a small brush to do tire dressing. Normally about a hour to finish the job. The cars paint has no spider webbing!
__________________
Artic Silver Boxster S - Black Leather - Black Top - Convience Plus Package
Lew is offline   Reply With Quote
Old 03-24-2017, 09:51 AM   #14
Registered User
 
Join Date: Nov 2015
Location: ontario
Posts: 377
Optimum no rinse is pretty good stuff. Water alone will not provide enough lubrication between your paint and the microfibre to prevent marring the finish so its important you use some sort of waterless/rinseless wash product. Just remember to always use a clean portion of the microfibre when you're wiping. You'll probably go through several. If your car is really dirty, its always best to rinse it with water first.

Everything you would need to know can be found here:

Auto Detailing Facts, auto detailing Tips, How to detailing Guides, how to polish, how to wax, DIY detailing, do it yourself guides
boxxster is offline   Reply With Quote
Old 03-24-2017, 05:49 PM   #15
Registered User
 
Join Date: May 2015
Location: Greater Seattle, WA
Posts: 534
Quote:
Originally Posted by boxxster View Post
Be aware that auto geek forums are moderated to basically only promote shilling for the products sold by autogeek. Autogeek will remove content (e.g., delete threads) promoting products not sold by Autogeek, which compete with AutoGeek-offered products.

Personally, I would recommend looking elsewhere besides autogeek for more unbiased detailing "facts" and "how to guides"... find a resource that is less biased.

But back to the (very old thead!) topic at hand - yeah, Optimum no rinse is good stuff. Makes a very economical clay bar lubricant, too.
__________________
2001 Boxster
jakeru is offline   Reply With Quote
Old 03-24-2017, 06:36 PM   #16
Registered User
 
Join Date: Nov 2015
Location: ontario
Posts: 377
Quote:
Originally Posted by jakeru View Post
Be aware that auto geek forums are moderated to basically only promote shilling for the products sold by autogeek. Autogeek will remove content (e.g., delete threads) promoting products not sold by Autogeek, which compete with AutoGeek-offered products.
Agreed. I've actually never bought anything from there. The how to guides I linked to are very useful though.
boxxster is offline   Reply With Quote
Old 03-26-2017, 12:48 PM   #17
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,123
Garage
Not long ago I took off the rear bumper cover of one of my cars and took it for estimates at a couple of good shops. They all said they would not do it unless they had the car to insure the paint would match.

Since driving the car without the bumper/license plate is not a good idea, taking it off was a waste of time.
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster original owner. I installed used motor at 89k.
1987 924S. 2002 996TT. PST-2
Owned and repaired Porsches since 1974. Porsche: It's not driving, it's therapy.
Paul is offline   Reply With Quote
Old 03-26-2017, 01:19 PM   #18
07 Carrera S Cab
 
Boxtaboy's Avatar
 
Join Date: Nov 2005
Location: New Jersey
Posts: 2,273
Garage
Quote:
Originally Posted by Paul View Post
Not long ago I took off the rear bumper cover of one of my cars and took it for estimates at a couple of good shops. They all said they would not do it unless they had the car to insure the paint would match.

Since driving the car without the bumper/license plate is not a good idea, taking it off was a waste of time.
Just give them a piece from the car that is painted, and they can still match it. For example, when I wanted the shop to paint my side skirts, I just gave them one of my painted bumperettes to use for the paint match. It came out perfect. For a rear bumper, I'd just remove the painted lid from my rear spoiler to match with.
__________________
Current: 07 Carrera S Cab in Midnight Blue

Previous: 01 Boxster in Arctic Silver, 86 944 in Guards Red
Boxtaboy is offline   Reply With Quote
Old 03-26-2017, 04:37 PM   #19
Registered User
 
Join Date: Mar 2014
Location: Eastern NC
Posts: 695
Garage
I need a front bumper and mirror respray. In the meantime - I found that replacing the mirror was cheap and easy and just bought a replacement. The mirror swap was easy and cheaper then any respray. So shop the respray of the bumper and look to Woody for a new mirror.
__________________
"YouTube Certified in Various Specialties"
BFeller is offline   Reply With Quote
Old 04-09-2017, 06:37 AM   #20
Lew
So Blessed!
 
Lew's Avatar
 
Join Date: Nov 2016
Location: SE Georgia
Posts: 389
Garage
Clear Film

Anyone have the clear film paint protector installed on their Boxster? My front Bumper has a few rock chips on the lower half and I am thinking about having the Lumar clear film installed now on my Hood, Lights, and side Mirrors. I would like to install it on my bumper but not before having the paint chips removed. The Lumar film is supposed to be the best, and I have heard if a rock hits the film and puts a small depression in the film, it will heal itself. Not so with other films I hear.

__________________
Artic Silver Boxster S - Black Leather - Black Top - Convience Plus Package
Lew is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 10:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page